Single Coil Placement Guide

 

MiraMate Mini PEMF Device coil positioning styles:

Side-by-side:

  • Increases treatment area
  • Treatment depth is shallow

Stacked:

  • Increases depth of treatment
  • Bumps on coils must be facing each other

Above & Below:

  • Treats entire area between the two coils
  • Recommended for most treatments

Separately:

  • Coils can be placed on two separate areas of the body, treating two areas and the same time.
  • Treatment depth is shallow

 

Note: Coils can be placed and used over clothing as long as the material is not too thick.

Testing your coils:

Each MiraMate Mini PEMF Device order includes a coil tester that can be used to test whether the two coils are operating properly.

  1.  Place coil tester on a flat surface
  2. Turn on MiraMate Mini PEMF Device
  3.  Place single coil on top of coil tester
  4.  If red light begins to flash your coil is operating properly

Related Articles:

 

Pulse Laser Relief Reviews